Sale!

Carr Lane CL-62-CSHKA-1.50 | 1-1/2 Thread x 3/8-16″ Length Captive Locating Screws with Hand Knob – All Industrial Tool Supply

$33.53 $41.91
Review

Captive Locating Screws with Hand KnobThese Captive Locating Screws have an integral hand knob for tightening by hand. Captive Locating Screws can be used for locating and clamping, or for clamping only, by selecting the appropriate screw length. The locat

  • Satisfaction 100% Guaranteed
  • Free shipping on orders over $30
  • 60 day easy Return

Qty:

SKU: 50024080 Category:

Description

Captive Locating Screws with Hand Knob

These Captive Locating Screws have an integral hand knob for tightening by hand. Captive Locating Screws can be used for locating and clamping, or for clamping only, by selecting the appropriate screw length. The locating screw’s precision-ground body is positively retained in a locking bushing. In fully retracted position, the bushing’s spring clip snaps into the body’s radial groove. This holds the screw fully retracted by spring force and positively prevents removal. Spring pressure also holds the screw in intermediate extended positions, an advantage especially if the fixture is turned upside down. Made in USA.The complete assemblies listed below include a Captive Locating Screw, Locking-Pin Bushing, and Lockscrew. Choice of standard or long bushing in most sizes, for installation in thinner or thicker plates. Locking-Pin Bushings are designed to press fit in a standard reamed hole, and can be further secured with the included Lockscrew to positively hold the bushing in place.

Application Information

In fully retracted position, the bushing’s spring clip holds the Locating Screw fully retracted by spring force and positively prevents removal. Spring pressure also holds the screw in intermediate extended positions.

Material

Steel
Item Material Heat Treat Finish
Knob 319 Aluminum Alloy N/A
Screw 1215 Steel Carburized-hardened Black Oxide
Locking Bushing 1144 Steel or Equivalent Carburized-hardened Black Oxide
Retainer Clip Stainless Steel N/A

Parts Specification

A Diameter Nominal (Inch) A Diameter Actual (Inch) B Screw Length (Inch) P Bushing Length Under Head (Inch) P (Inch) C (Inch) D (Inch) E Thread (Inch) F (Inch) G (Inch) K Diameter (Inch) L (Inch) M (Inch) N Diameter Nominal (Inch) N Diameter Actual (Inch) R (Inch) S Diameter (Inch)
3/8″ 0.3740″ 1-1/2″ Long” 0.50″ 2.5″ 1.5″ 3/8-16″ 0.56″ 0.75″ 1″ 1.06″ 0.41″ 5/8″ 0.6267″ 0.62″ 13/16″

Reviews

There are no reviews yet.

Be the first to review “Carr Lane CL-62-CSHKA-1.50 | 1-1/2 Thread x 3/8-16″ Length Captive Locating Screws with Hand Knob – All Industrial Tool Supply”

Your email address will not be published. Required fields are marked *