Description
Serrated Adjustable Edge Clamps
These low-profile clamps are ideal for securely gripping the side of a workpiece to keep the top clear for machining, especially when a large clamping range is required to accommodate workpiece-size variations. The serrated jaw slides at a 45 angle to exert clamping force both forward and downward simultaneously. Clamp by tightening the socket-head screw in the sliding jaw with a hex wrench. Choice of high-nose clamping jaw or low-nose clamping jaw. V-groove in nose is useful for clamping round parts or corners.The adjustable (slotted) edge clamps are useful for mounting directly on a machine table. The slot is tapered to prevent the clamp from backing off under heavy forces (use two mounting screws on longer clamps).
Application Information
Clamp by tightening the socket-head screw in the sliding jaw with a hex wrench.
High-Nose Version
The high-nose version is best for most applications-gripping high on the workpiece, close to the machining plane, to provide maximum clamping rigidity. This version includes a removable aluminum nose cover for clamping soft or machined parts without damage.
Material
| Item | Material | Heat Treat | Finish | DFARS | RoHS |
| Body and Nose | 1018 Steel | Carburized Hardened | Black Oxide | Yes | Yes |
| Clamping Screw | 4140 Steel | Heat Treated Rc 43-45 | Black Oxide | Yes | Yes |
Parts Specification
| Mounting Screw Size | A | B | C | G | H | J | K | L | M | Q |
| 3/8-16 or M10 | 4-5/32 | 5/8 | 1-1/4 | 1-7/16 | 3/8 | 7/16 | 1/4 | 3-17/32 | 3/16 | 2 |
Reviews
There are no reviews yet.