Description
One-Touch Quick-Acting Swing Clamps
One-Touch Swing Clamps are manually operated clamps that first rotate exactly 70 clockwise into position then clamp straight down in one continuous motion. The version is operated by a radial cam lever that swings in a horizontal arc.
Operation
Starting with the clamping arm swung away for loading, turn the lever to rotate the arm into clamping position and automatically move the arm downward to apply clamping force. A small portion of the total vertical stroke is used to swing, and slightly advance the clamping arm, then the remaining stroke is available as the clamping range. To unclamp, reverse the lever movement to lift the arm straight up and automatically return the arm to its original position for loading.
Starting position, with clamping arm swung away for loading.
Mounting
Fasten with two socket-head cap screws using the two mounting slots. To allow for workpiece variation, adjust spindle extension so that full clamping force is achieved approximately in the middle of the lever’s 100 clamping range.
Material
| Item | Material | Heat Treat | Finish | RoHS |
| Base, Spindle and Lever | 1045 Steel | Heat Treated | Black Oxide | Yes |
| Clamping-arm body and spiral-cam shaft | Alloy Steel | Heat Treated | Black Oxide | Yes |
| Knob Handle | Black phenolic plastic | – | – | Yes |
Parts Specification
| Maximum Clamping Force (lbs) | Maximum Allowable Torque (ft-lbs) | Swing Stroke | Clamping Stroke (max) | A Unclamped Position | A Start of Clamping Range | A End of Clamping Range | B | C | D Diameter | E | F | G | H | J | K | L | M | N | P Diameter | Q | R | S | T Thread | U Diameter | V Diameter |
| 800 lbs | 23 ft-lbs | 0.07 | 0.07 MAX | 2.43 | 2.36 | 2.29 | 0.87 | 1.57 | 1.57 | 3.66 | 3.94 | 2.17 | 1.77 | 0.31 | 1.00 | 0.79 | 0.409 | 3.94 | 1.30 | 3.35 | 0.59 | 2.00 | 3/8-16 | 0.409 | 2.520 |
Reviews
There are no reviews yet.